Download Print this page

Server Technology PRO2 Switched POPS C2WG12BM User Manual page 116

Advertisement

To set an LDAP group's access level:
1. For the LDAP group name displayed in the list, click the Edit link. The LDAP Group Edit page displays.
2. From the Access Level drop-down menu, select the desired user access level as described in the table
below.
3. Click Apply.
User Access Level
(highest to lowest)
Administrator
Power User
User
To delete an LDAP group:
1. For the LDAP group name displayed in the list, click the Remove link. You will be prompted with a
confirmation for the delete action.
2. Click OK or Cancel.
Using the Web Interface
Description
Administrative user; full access for all configuration, status, and
serial/pass-thru ports.
Full access for status and serial/pass-thru ports.
Note: The Power User does not have access to user management.
Partial access for status and pass-thru of assigned outlets, outlet
groups, and serial/pass-thru ports.
Smart PRO2 – User Guide
116

Advertisement

loading
Need help?

Need help?

Do you have a question about the PRO2 Switched POPS C2WG12BM and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Switched pro2Pro2 smart/switched c2w48cePro1 switched pops c1wg-24vd/yPro2 hdotPro2 switched pops