Server Technology PRO2 Switched POPS C2WG12BM User Manual page 133

Command
set ldap
set ldapgroup
set line
set location
set net
set ocp
set outlet
set phase
set port
set radius
set sensor
set snmp
set sntp
set spm
set ssh
set syslog
set tacacs
set tacpriv
set telnet
set trend
set unit
set ups
set user
set wlan
Using the Command Line Interface (CLI)
Description
Sets LDAP configuration values.
Sets configuration values for LDAP group access rights.
Sets line configuration values.
Sets the system location string.
Sets network mode configuration values.
Sets over-current protector (OCP) configuration values.
Sets outlet configuration values.
Sets phase configuration values.
Sets serial port configuration values.
Sets Radius server configuration values.
Sets sensor configuration values.
Sets SNMP configuration values.
Sets SNTP configuration values.
Sets Sentry Power Manager (SPM) access configuration values.
Sets SSH configuration values.
Sets Syslog configuration values.
Sets TACACS+ server configuration values.
Sets TACACS+ configuration values for privilege level access rights.
Sets Telnet configuration values.
Sets power trending configurations.
Sets PRO2 configuration values.
Sets UPS device configuration values.
Sets configuration values for local user access rights.
Sets the wireless network configuration (for the WLAN solution on specific Wi-Fi capable
PRO2 units).
Smart PRO2 – User Guide
•
133