Remove User - Server Technology PRO2 Switched POPS C2WG12BM User Manual

remove ups
Command Syntax
Command Access

remove user

Command Syntax
Command Access
restart
Command Syntax
Parameters
Command Access
senstat
Command Syntax
Command Access
Using the Command Line Interface (CLI)
Removes an uninterruptable power supply (UPS) from the system.
remove ups <name>
Admin level only
Removes a local user from the system.
remove ups <name>
Admin level only
Restarts the system.
restart [factkeepnet | factory | ftpload | newx509cert | newsshkeys | normal]
The restart command uses the following parameters.
Note: None of the parameters in the following table performs a normal system restart.
factkeepnet Removes all system configurations except network configuration.
factory Removes all system configurations.
ftpload Performs a system update through an FTP load.
newx509cert Creates a new self-signed SSL X509 certificate.
newsshkeys Creates a new set of public and private SSH keys.
normal Performs a normal system restart.
Admin level only; no access in Demo mode
Displays the latest status and metrics for all sensors in the system.
senstat
System monitor access
Smart PRO2 – User Guide
•
147