Set Telnet - Server Technology PRO2 Switched POPS C2WG12BM User Manual

set telnet

Command Syntax
Parameters
Command Access
set trend
Command Syntax
Command Access
set unit
Command Syntax
Parameters
Using the Command Line Interface (CLI)
Sets Telnet configuration values.
set telnet [disabled | enabled]
set telnet port <port>
The set telnet command uses the following parameters:
port Sets the port for Telnet connections 1-65535 (default is 23).
Admin level only; no access in Demo mode
Sets power trending configurations.
set trend [disabled | enabled]
Admin level only; no access in Demo mode
Sets PRO2 configuration values.
set unit assettag <name | id> <asset tag>
set unit display [auto | inverted | normal] <name | id | ALL>
set unit email [disabled | enabled] <name |id | ALL>
set unit identify [disabled | enabled] <name | id | ALL>
set unit name <name | id> <new name>
Factory unlocked only:
set unit golden [disabled | enabled]
set unit prodsn <name | id> <prod sn>
Confirmation required:
set unit purge <name | id | ALL>
set unit snmpt [disabled | enabled] <name | id | ALL>
The set unit command uses the following parameters:
assettag The asset tag value of the unit. 0-32 characters.
display Sets the orientation of the displays on a unit.
email Email notifications for an event.
golden Set to have the system not retain unit information.
identify Set to enable/disable flashing display.
Smart PRO2 – User Guide
•
171