Server Technology PRO2 Switched POPS C2WG12BM User Manual page 156

Sub-Parameters
Command Access
set http
Command Syntax
Parameters
Command Access
set https
Command Syntax
Parameters
Command Access
Using the Command Line Interface (CLI)
The set ftp command uses the following sub-parameters:
day Sets the day of the week to automatically update system firmware.
hour Sets the hour of the day to automatically update system firmware.
Admin level only; no access in Demo mode
Sets HTTP configuration values.
set http [disabled | enabled]
set http port <port>
The set http command uses the following parameter:
port Sets the port for HTTP connections. 1-65535 (default 443).
Admin level only; no access in Demo mode
Sets HTTPS configuration values.
set https [disabled | enabled]
set https port <port>
set https usercert [disabled | enabled]
set https userpass <passphrase>
The set https command uses the following parameters:
port Sets the port for HTTPS connections.1-65535 (default 80).
usercert Sets to use user-provided certificates instead of system self-signed
certificates.
userpass Sets the pass phrase for user-provided certificates. 0-63 characters.
Admin level only; no access in Demo mode
Smart PRO2 – User Guide
•
156