Server Technology PRO2 Switched POPS C2WG12BM User Manual page 69

Configuring Outlet Power Factor Thresholds
Click the outlet power factor thresholds link at the bottom of the Outlets page to display the configuration page:
To set outlet power factor thresholds:
1. Provide a numeric value for the threshold hysteresis between event state and recovery. Range is 0.0-0.20;
default is 0.02.
2. Set numeric values for the low alarm/warning outlet power factor thresholds. Range is min 0.00; max is
1.00.
3. Click Apply.
Using the Web Interface
Smart PRO2 – User Guide
•
69