Server Technology PRO2 Switched POPS C2WG12BM User Manual page 117

Access > TACACS+ Privileges
The TACACS+ Privileges page allows the administrator to manage options for TACACS+ user groups, including
establishing TACACS+ privilege levels and granting TACACS+ privilege level access to various areas of the PRO2.
Note: The PRO2 supports 16 different TACACS+ privilege levels with 15 configurable levels and 1 level ("0")
reserved by default for administrator-level access to all PRO2 resources.
To set a TACACS+ privilege level:
1. For the TACACS+ Privilege Level displayed in the list, click the Edit link. The TACACS+ Privilege Level
Edit page displays.
2. From the Access Level drop-down menu, select the desired user access level as described in the table
below.
3. Click Apply.
User Access Level
(highest to lowest)
Administrator
Power User
User
To grant access rights to a TACACS+ privilege level:
1. For the TACACS+ Privilege Level displayed in the list, click the Access link. The TACACS+ Privilege Level
Access page displays to allow granting access rights to selected PRO2 monitors, remote ports, outlet
groups, and individual outlets by checking corresponding checkboxes. To deny access to an individual
resource, uncheck the related checkbox. To grant (or deny) access to all resources in a displayed group,
click All or None.
2. Click Apply.
Using the Web Interface
Description
Administrative user; full access for all configuration, status, and
serial/pass-thru ports.
Full access for status and serial/pass-thru ports.
Note: The Power User does not have access to user management.
Partial access for status, pass-thru of assigned outlets, outlet groups,
and serial/pass-thru ports.
Smart PRO2 – User Guide
•
117