Setting Snmpv3 Views - Enterasys Matrix-V V2H124-24 Configuration Manual

3
Configuring the Switch
CLI – Use the snmp-server group command to configure a new group, specifying
the security model and level, and restricting MIB access to defined read and write
views.
Console(config)#snmp-server group v3secure v3 priv read defaultview write
defaultview
Console(config)#exit
Console#show snmp group
Group Name: v3secure
Security Model: v3
Read View: defaultview
Write View: defaultview
Notify View: none
Storage Type: nonvolatile
Row Status: active
Console#

Setting SNMPv3 Views

SNMPv3 views are used to restrict user access to specified portions of the MIB tree.
The predefined view "defaultview" includes access to the entire MIB tree.
Command Attributes
• View Name – The name of the SNMP view. (Range: 1-64 characters)
• View OID Subtrees – Shows the currently configured object identifiers of branches
within the MIB tree that define the SNMP view.
• Edit OID Subtrees – Allows you to configure the object identifiers of branches
within the MIB tree. Wildcards can be used to mask a specific portion of the OID
string.
• Type – Indicates if the object identifier of a branch within the MIB tree is included
or excluded from the SNMP view.
3-44
4-146
4-146