Figure 3-58. Lacp Aggregation Port Configuration - Enterasys Matrix-V V2H124-24 Configuration Manual

Matrix v-series fast ethernet switch

Hide thumbs Also See for Matrix-V V2H124-24:

Table of Contents

Configuring the Switch

Web – Click Port, LACP, Aggregation Port. Set the System Priority, Admin Key, and

Port Priority for the Port Actor. You can optionally configure these settings for the

Port Partner. (Be aware that these settings only affect the administrative state of the

partner, and will not take effect until the next time an aggregate link is formed with

this device.) After you have completed setting the port LACP parameters, click Apply.

Figure 3-58. LACP Aggregation Port Configuration

Show Quick Links

Table of Contents

Matrix-v v2h124-24fx Matrix-v v2h124-24p