Figure 3-106. Configuring Internet Group Management Protocol - Enterasys Matrix-V V2H124-24 Configuration Manual

Notes: 1. All systems on the subnet must support the same version.
2. Some attributes are only enabled for IGMPv2, including IGMP Report Delay
and IGMP Query Timeout.
Web – Click IGMP, IGMP Configuration. Adjust the IGMP settings as required, and
then click Apply. (The default settings are shown below.)

Figure 3-106. Configuring Internet Group Management Protocol

CLI – This example modifies the settings for multicast filtering, and then displays the
current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping query-time-out 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Igmp Snooping Configuration
----------------------------------------------
Service status:
Querier status:
Query count:
Query interval:
Query max response time:
Query time-out:
IGMP snooping version:
Console#
Enabled
Enabled
10
100 sec
20 sec
300 sec
Version 2
Multicast Filtering
4-225
4-228
4-229
4-230
4-230
4-231
4-226
4-227
3-173
3