logging sendmail
This command enables SMTP event handling. Use the no form to disable this
function.
Syntax
[no] logging sendmail
Default Setting
Disabled
Command Mode
Global Configuration
Example
Console(config)#logging sendmail
Console(config)#
show logging sendmail
This command displays the settings for the SMTP event handler.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show logging sendmail
SMTP servers
-----------------------------------------------
1. 192.168.1.4
2. 192.168.1.5
SMTP minimum severity level: 4
SMTP destination email addresses
-----------------------------------------------
1. anyone@Enterasys.com
2. anyone2@Enterasys.com
SMTP source email address:
SMTP status:
Console#
this-switch@Enterasys.com
Enabled
System Management Commands
4
4-53