Enterasys Matrix-V V2H124-24 Configuration Manual page 340

4
Command Line Interface
max-req (page 4-101). It also displays the following global parameters
which are set to a fixed value, including the following items:
- supp-timeout
- server-timeout
- reauth-max
- 802.1X Port Summary – Displays the port access control parameters for
each interface, including the following items:
- Status
- Mode
- Authorized
- 802.1X Port Details – Displays detailed port access control settings for each
interface as described in the preceding pages, including administrative
status for port access control, Max request (page 4-101), Quiet period
(page 4-104), Reauth period (page 4-104), Tx period (page 4-105), and
Port-control (page 4-102). It also displays the following information:
- Status
- Supplicant
- Authenticator State Machine
- State
- Reauth Count
- Backend State Machine
- State
- Request Count
- Identifier(Server) – Identifier carried in the most recent EAP Success,
- Reauthentication State Machine
- State
4-106
– Supplicant timeout.
– Server timeout.
– Maximum number of reauthentication attempts.
– Administrative state for port access control.
– Dot1x port control mode (page 4-102).
– Authorization status (yes or n/a - not authorized).
– Authorization status (authorized or unauthorized).
– MAC address of authorized client.
– Current state (including initialize, disconnected,
connecting, authenticating, authenticated, aborting,
held, force_authorized, force_unauthorized).
– Number of times connecting state is re-entered.
– Current state (including request, response,
success, fail, timeout, idle, initialize).
– Number of EAP Request packets sent to the
Supplicant without receiving a response.
Failure or Request packet received from the
Authentication Server.
– Current state (including initialize, reauthenticate).