Show Users - Enterasys Matrix-V V2H124-24 Configuration Manual

• The POST results should all display "PASS." If any POST test indicates "FAIL,"
contact your distributor for assistance.
Example
This example displays system information for the V2H124-24P.
Console#show system
System description: Enterasys Networks, Inc. V2H124-24; SW version:
V2.5.2.1
System OID string: 1.3.6.1.4.1.5624.2.1.62
System information
System Up time:
System Name:
System Location:
System Contact:
MAC address:
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server:
Telnet server port:
Authentication login:
Authentication enabled:
System MTU size :
POST result
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a "*" symbol next to
the Line (i.e., session) index number.
0 days, 1 hours, 34 minutes, and 7.77 seconds
[NONE]
[NONE]
[NONE]
00-01-F4-8B-22-80
enabled
80
enabled
443
enable
23
RADIUS local
local
1500
System Management Commands
4
4-63