Figure 1-15. Remote Management Setup Menu
Management stations are computers on the network that will
be used to manage the switch. You can limit the number of
possible management stations by entering up to three IP
addresses in the Management Station IP Settings: field. If
the three IP Address:[0.0.0.0] fields contain all zeros ("0"),
then any station with any IP address can access the switch
to manage and configure it. If there is one or more IP
addresses entered in the IP Address:[0.0.0.0] field, then
only stations with the IP addresses entered will be allowed to
access the switch to manage or configure it.
Setting Up Trap Receivers
This allows the switch to send traps (messages about errors,
etc.) to management stations on the network. Highlight
Setup Trap Receivers and press enter. The trap recipients
can be setup from the following screen:
9033691-01
VH-2402-L3 Management Guide 21