Show Map Ip Precedence - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Console#show map ip port
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5
Console#
Related Commands
map ip port (Global Configuration) (4-217)
map ip port (Interface Configuration) (4-218)

show map ip precedence

Use this command to show the IP precedence priority map.
Syntax
show map ip precedence [interface]
interface
- ethernet unit/port
- unit - This is device 1.
- port - Port number.
- port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
4-222
80 0