Show Queue Mode; Show Queue Bandwidth - Enterasys Matrix-V V2H124-24 Configuration Manual

Example
The following example shows how to map CoS values 0, 1 and 2 to priority queue 0,
value 3 to queue 1, values 4 and 5 to queue 2, and values 6 and 7 to queue 3:
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 1 2
Console(config-if)#queue cos-map 1 0 3
Console(config-if)#queue cos-map 2 4 5
Console(config-if)#queue cos-map 3 6 7
Console(config-if)#exit
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#
Related Commands
show queue cos-map (4-216)

show queue mode

This command shows the current queue mode.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue mode
Queue mode: wrr
Console#

show queue bandwidth

Use this command to display the weighted round-robin (WRR) bandwidth allocation
for the priority queues.
Default Setting
None
Command Mode
Privileged Exec
4
Priority Commands
4-215