Web – Click Security, IP Filter. Enter the addresses that are allowed management
access to an interface, and click Add IP Filtering Entry.
Figure 3-45. Entering IP Addresses to be Filtered
CLI – This example restricts management access for Telnet and SNMP clients.
Console(config)#management telnet-client 192.168.1.19
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#management snmp-client 10.1.2.3 255.255.255.255
Console(config)#end
Console#show management telnet-client
Management IP Filter
TELNET-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#show management snmp-client
Management IP Filter
SNMP-Client:
Start IP address
-----------------------------------------------
1. 10.1.2.3
Console#
End IP address
192.168.1.19
192.168.1.30
End IP address
255.255.255.255
User Authentication
4-28
4-28
4-29
4-29
3-73
3