Frame Size Commands; System Mtu - Enterasys Matrix-V V2H124-24 Configuration Manual

Frame Size Commands

Command

system mtu

system mtu
This command sets the maximum transfer unit for traffic crossing the switch. Use the
no form to restore the default setting.
Syntax
system mtu size
no system mtu
size - Specifies the MTU size. (Range: 1500-1548 bytes)
Default Setting
1500 bytes
Command Mode
Global Configuration
Command Usage
The current MTU size can be displayed using the show system command
(see page 4-63).
Example
Console(config)#system mtu 1548
Console(config)#
Table 4-1 Frame Size Commands
Function
Sets the maximum transfer unit
System Management Commands
Mode
GC
4
Page
4-65
4-65