Command Mode
Global Configuration
Example
Console(config)#prompt V2H124-24P
V2H124-24P(config)#
hostname
Use this command to specify or modify the host name for this device. Use the no
form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname Enterasys Matrix-V Series
Console(config)#
User Access Commands
The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 4-9), user authentication via a remote authentication server
(page 4-137), and host access authentication for specific ports (page 4-99).
Command
username
enable password
Table 4-9. User Access Commands
Function
Establishes a user name-based authentication system at login
Sets a password to control access to the Privileged Exec level
System Management Commands
Mode
GC
GC
4
Page
4-26
4-27
4-25