Cabletron Discovery Protocol (Cdp); Cdp Authentication Key; Table 4-24. Cdp Commands - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Example
Console(config)#boot system config: startup
Console(config)#
Related Commands
dir (4-70)
whichboot (4-71)

Cabletron Discovery Protocol (CDP)

The Cabletron Discovery Protocol (CDP) protocol enables a switch to discover the
topology of other CDP-aware devices in the network. The protocol allows each
switch to determine if other CDP-aware switches are adjacent to it.
Command Group

cdp authentication key

cdp holdtime
cdp timer
cdp
cdp
show cdp
show cdp interface
show cdp neighbors
show cdp traffic
cdp authentication key
Use this command to set the code string that defines the CDP domain. Use the no
form to restore the default.
Syntax
cdp authentication key key_string
no cdp authentication key
key_string - The character string that defines the CDP domain. Do not use
blank spaces in the string. (Maximum length: 16 characters)
Default Setting
null string
4-72

Table 4-24. CDP Commands

Function
Sets the CDP domain to which the switch belongs
Sets the time the switch waits for update CDP packets
from neighbor devices
Specifies how often the switch sends CDP updates
Sets the global switch CDP action.
Sets the CDP action for an interface
Displays the global CDP configuration settings
Displays CDP interface configuration settings
Displays information received from neighbor
CDP-compliant devices
Displays CDP traffic statistics
Mode Page
GC 4-72
GC 4-73
GC 4-74
GC 4-74
IC 4-75
PE 4-76
PE 4-76
PE 4-76
PE 4-78