Show Management - Enterasys Matrix-V V2H124-24 Configuration Manual

Example
This example restricts management access to the indicated addresses.
Console(config)#management all-client 192.168.1.19
Console(config)#management all-client 192.168.1.25 192.168.1.30
Console#

show management

This command displays the client IP addresses that are allowed management
access to the switch through various protocols.
Syntax
show management {all-client | http-client | snmp-client | telnet-client}
• all-client - Adds IP address(es) to the SNMP, web and Telnet groups.
• http-client - Adds IP address(es) to the web group.
• snmp-client - Adds IP address(es) to the SNMP group.
• telnet-client - Adds IP address(es) to the Telnet group.
Command Mode
Global Configuration
Example
Console#show management all-client
Management Ip Filter
Http-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Snmp-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Telnet-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
End ip address
192.168.1.19
192.168.1.30
End ip address
192.168.1.19
192.168.1.30
End ip address
192.168.1.19
192.168.1.30
System Management Commands
4
4-29