Snmp-Server Contact; Snmp-Server Location - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Command Mode
Global Configuration
Example
Console(config)#snmp-server community alpha rw
Console(config)#

snmp-server contact

Use this command to set the system contact string. Use the no form to remove the
system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server contact Paul
Console(config)#
Related Commands

snmp-server location (4-140)

snmp-server location
Use this command to set the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
4-140