Spanning Tree Commands; Table 4-58. Spanning Tree Commands - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Command
spanning-tree
spanning-tree mode
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree default priority Changes the default spanning-tree priority format from
spanning-tree pathcost
method
spanning-tree
transmission-limit
spanning-tree
mst-configuration
spanning-tree backup-root
mst vlan
mst priority
name
revision
max-hops
spanning-tree
spanning-disabled
spanning-tree cost
spanning-tree port-priority
spanning-tree edge-port
spanning-tree portfast
spanning-tree link-type
spanning-tree mst cost
spanning-tree mst
port-priority
spanning-tree
protocol-migration
4-178

Table 4-58. Spanning Tree Commands

Function
Enables the spanning tree protocol
Configures STP or RSTP mode
Configures the spanning tree bridge forward time
Configures the spanning tree bridge hello time
Configures the spanning tree bridge maximum age
Configures the spanning tree bridge priority
802.1t to 802.1D format.
Configures the path cost method for RSTP
Configures the transmission limit for RSTP
Changes to MSTP configuration mode
Adjusts the bridge priority in an attempt to take over as the
root bridge if it loses contact with the original root device
Adds VLANs to a spanning tree instance
Configures the priority of a spanning tree instance
Configures the name for the multiple spanning tree
Configures the revision number for the multiple spanning
tree
Configures the maximum number of hops allowed in the
region before a BPDU is discarded
Disables spanning tree for an interface
Configures the spanning tree path cost of an interface
Configures the spanning tree priority of an interface
Enables fast forwarding for edge ports
Sets an interface to fast forwarding
Configures the link type for RSTP/MSTP
Configures the path cost of an instance in the MST
Configures the priority of an instance in the MST
Re-checks the appropriate BPDU format
Mode Page
GC 4-179
GC 4-179
GC 4-181
GC 4-181
GC 4-182
GC 4-183
GC 4-183
GC 4-184
GC 4-184
GC 4-185
GC 4-193
MST 4-185
MST 4-186
MST 4-187
MST 4-187
MST 4-188
IC 4-185
IC 4-189
IC 4-190
IC 4-191
IC 4-191
IC 4-192
IC 4-194
IC 4-194
PE 4-195