Figure 3-103. Mapping Priority Settings To Ports/Trunks - Enterasys Matrix-V V2H124-24 Configuration Manual

Web – Click Priority, Copy Settings. Select the source priority settings to be copied,
enter the source port or trunk number and choose the destination interface/s to copy
to, then select Copy Settings.

Figure 3-103. Mapping Priority Settings to Ports/Trunks

CLI – The following example shows how to map HTTP traffic to CoS value 0 on
port 5, maps IP precedence to CoS 0 to port 6, and enables mapping IP DSCP
globally.
Console#con
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0
Console(config)#interface ethernet 1/6
Console(config-if)#map ip precedence 1 cos 0
Console(config-if)#exit
Console(config)#map ip dscp
Console(config)#
Class of Service Configuration
3
4-218
4-219
4-220
3-167