Show Ip Address - Enterasys N Standalone (NSA) Series Configuration Manual

General Configuration Command Set
Setting Basic Device Properties
2.2.3.1

show ip address

Use this command to display the system IP address and subnet mask.
show ip address
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the system IP address and subnet mask:
Matrix(rw)->show ip address
Name
----------------
host
2-44 Matrix NSA Series Configuration Guide
Address
----------------
10.42.13.20
Mask
----------------
255.255.0.0