Dot1X Test Eapol-Capable - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

dot1x test eapol-capable

Use the dot1x test eapol-capable privileged EXEC command on the switch stack or on a standalone
switch to monitor IEEE 802.1x activity on all the switch ports and to display information about the
devices that are connected to the ports that support IEEE 802.1x.
Syntax Description interface interface-id
Defaults
There is no default setting.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
Use this command to test the IEEE 802.1x capability of the devices connected to all ports or to specific
ports on a switch.
There is not a no form of this command.
Examples
This example shows how to enable the IEEE 802.1x readiness check on a switch to query a port. It also
shows the response received from the queried port verifying that the device connected to it is
IEEE 802.1x-capable:
switch# dot1x test eapol-capable interface gigabitethernet1/0/13
DOT1X_PORT_EAPOL_CAPABLE:DOT1X: MAC 00-01-02-4b-f1-a3 on gigabitethernet1/0/13 is EAPOL
capable
Related Commands Command
dot1x test timeout
OL-21522-02
dot1x test eapol-capable [interface interface-id]
(Optional) Port to be queried.
Modification
This command was introduced.
timeout
Description
Configures the timeout used to wait for EAPOL response to
an IEEE 802.1x readiness query.
Catalyst 3750-X and 3560-X Switch Command Reference
dot1x test eapol-capable
2-183