Show Ipv6 Mld Snooping Mrouter - Cisco Catalyst 3750 Metro Command Reference Manual

show ipv6 mld snooping mrouter

show ipv6 mld snooping mrouter
Use the show ipv6 mld snooping mrouter user EXEC command to display dynamically learned and
manually configured IP version 6 (IPv6) Multicast Listener Discovery (MLD) router ports for the switch
or a VLAN.
This command is available only if you have configured a dual IPv4 and IPv6 Switch Database
Note
Management (SDM) template on the switch.
Syntax Description vlan vlan-id
Command Modes User EXEC
Command History Release
12.2(52)SE
Usage Guidelines Use this command to display MLD snooping router ports for the switch or for a specific VLAN.
VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used
in MLD snooping.
To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 global
configuration command and reload the switch.
Examples This is an example of output from the show ipv6 mld snooping mrouter command. It displays snooping
characteristics for all VLANs on the switch that are participating in MLD snooping.
Switch> show ipv6 mld snooping mrouter
Vlan
----
2
72
200
This is an example of output from the show ipv6 mld snooping mrouter vlan command. It shows
multicast router ports for a specific VLAN.
Switch> show ipv6 mld snooping mrouter vlan 100
Vlan
----
2
Catalyst 3750 Metro Switch Command Reference
2-518
show ipv6 mld snooping mrouter [vlan vlan-id]
(Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.
Modification
This command was introduced.
ports
-----
Gi1/0/11(dynamic)
Gi1/0/11(dynamic)
Gi1/0/11(dynamic)
ports
-----
Gi1/0/11(dynamic)
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
OL-9645-10