Diagnostic Schedule - Cisco Catalyst 3560X-24P Command Reference Manual

diagnostic schedule

diagnostic schedule
Use the diagnostic schedule global configuration command to configure the diagnostic test schedule. Use
the no form of this command to remove the schedule.
Syntax Description switch number
test
name
test-id
test-id-range
all
basic
non-disruptive
daily hh:mm
on mm dd yyyy
hh:mm
weekly day-of-week
hh:mm
Defaults This command has no default settings.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
2-148
diagnostic schedule switch number test {name | test-id | test-id-range | all | basic | non-disruptive}
{daily hh:mm | on mm dd yyyy hh:mm | weekly day-of-week hh:mm}
no diagnostic schedule switch number test {name | test-id | test-id-range | all | basic |
non-disruptive} {daily hh:mm | on mm dd yyyy hh:mm | weekly day-of-week hh:mm}
Specify the switch number, which is the stack member number. If the
switch is a standalone switch, the switch number is 1. If the switch is in a
stack, the range is 1 to 9, depending on the switch member numbers in the
stack.
This keyword is supported only on on stacking-capable switches.
Specify the tests to be scheduled.
Specify the name of the test. For more information, see the "Usage
Guidelines" section.
Specify the ID number of the test. The range is from 1 to 7. For more
information, see the "Usage Guidelines" section.
Specify more than one test with the range of test ID numbers. For more
information, see the "Usage Guidelines" section.
Specify all of the diagnostic tests.
Specify the basic on-demand diagnostic tests.
Specify the nondisruptive health-monitoring tests.
Specify the daily scheduling of the diagnostic tests. For formatting
information, see the "Usage Guidelines" section.
Specify the scheduling of the diagnostic tests on a specific day and time.
For formatting information, see the "Usage Guidelines" section.
Specify the weekly scheduling of the diagnostic tests. For formatting
information, see the "Usage Guidelines" section.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02