Software Rev; Reinit Unit; Address; Set Passcode - ADTRAN TSU LT User Manual

Chapter 6. Utility Menu
To ....
Record the entry and move to the
next editing position
Move to the next editing position
or field
End the editing process

Software Rev

Use the
S R
OFTWARE EVISION
information is required when requesting assistance from ADTRAN Customer Service or when updates are
needed.

Reinit Unit

submenu is used to reinitialize the unit. This menu item is not used to restore the factory
R U
EINIT NIT
default settings for all parameters.

Address

is used to access the current
A
DDRESS
000 and 256. See Figure 6-3.

Set Passcode

allows a passcode to be added, changed, or deleted.
S P
ET ASSCODE

Fact Restore

The
F R
ACTORY ESTORE
restores all parameters to the factory settings.
52

Table 6-1. Editing the Time/Date

submenu to access the display of the current software revision level. This
U A
NIT DDRESS

Figure 6-3. Address Screen

submenu is used to restore the factory default setting for all unit parameters. This
© 2002 ADTRAN, Inc.
Do this ...
Press Enter (after any numeric
change)
Press Enter without making any
changes at the cursor.
Press the up and down arrow keys.
Press Cancel.
setting. Unit identification numbers must be between
TSU LT User Manual
61202060L4-1