Chapter 5. Configuration Menu
Selecting A
operation of unmodified ports.
Port Configuration (Port Config)
5-22
T
M
PPLY
EMP
AP TO
Review Map A (B)
Permits a quick review of the number of DS0s assigned
to each port and the number of unassigned DS0s (IDLE
or TST) as defined in the currently applied Map A (B).
Review Temp Map
This menu item is operated the same as R
(B).
Edit Temp Map
The map in the TEMP file can be edited to whatever con-
figuration is desired. If Map A had been copied into the
TEMP file, then after editing, the TEMP file could be
applied to MAP A or MAP B.
Apply Temp to Map A (B)
Writes the TEMP map into Map A (B). Apply is usually
the last step in updating a map.
P
C
ORT
ONFIGURATION
ters associated with any data port in the unit. For exam-
ple, parameters for the DS-1 (PBX) interface are set
through this menu. The items that can be set depend on
which option module is installed. The list of option ports
will vary with the configuration.
The TDU 120e is designed so that any additional ports de-
veloped in the future will contain the appropriate menu
selections to provide access by using this menu item.
TDU 120e User Manual
M
A (B) will not disrupt the
AP
selects and configures the parame-
M
A
EVIEW
AP
61202156L2-1