Selecting Encoder Modes - Yamaha DM1000 Owner's Manual

34
Chapter 3—Operating Basics

Selecting Encoder Modes

The function of Encoders (1–16) depends on the selected Layer and Encoder mode.
1 Select a layer that includes the desired channel (see page 31).
2 Press the corresponding ENCODER MODE button to
select an Encoder mode.
• When the [PAN] button indicator
lights up: ...............................................Encoders 1–16 function as
• When the [AUX] button indicator
lights up: ...............................................Encoders 1–16 function as Aux Send level con-
• When the [ASSIGN] button indicator
lights up: ...............................................Encoders control the parameters assigned to the
The following table shows the Encoder functions for each Layer and Encoder mode.
LAYER buttons
[1-16] button
[17-32] button
[33-48] button
[REMOTE 1] button
[REMOTE 2] button
[MASTER] button
DM1000—Owner's Manual
Pan controls for the
selected layer.
trols for the selected layer.
[ASSIGN] button for the selected layer. (See the
next section for more information on how to
assign parameters to the [ASSIGN] button.)
Encoder Mode
Pan Input Channels 1–16 pan
Aux Input Channels 1–16 Aux Send level
Assign Assigned parameter
Pan Input Channels 17–32 pan
Aux Input Channels 17–32 Aux Send level
Assign Assigned parameter
Pan Input Channels 33–48 pan
Aux Input Channels 33–48 Aux Send level
Assign Assigned parameter
Pan
Aux
Assign
Operation depends on the selected target (see
page 205).
Pan
Aux
Assign
Pan
No operation
Aux
Assign Assigned parameter
DISPLAY
PAN
Channel Strip Encoder
1–8 9–16
ENCODER MODE
AUX ASSIGN