Yamaha DM1000 Owner's Manual page 306

306
Appendix A: Parameter Lists
DELAY->ER.
One input, two output delay and early reflections effects in series.
Parameter
DELAY L
DELAY R
FB. DLY
FB. GAIN
HI. RATIO
HPF
LPF
DLY.BAL
TYPE
ROOMSIZE
LIVENESS
INI. DLY
DIFF.
DENSITY
ER NUM.
SYNC
NOTE L
NOTE R
NOTE FB
1.
setting)
DM1000—Owner's Manual
Range
0.0–1000.0 ms Left channel delay time
0.0–1000.0 ms Right channel delay time
0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
0.1–1.0 High-frequency feedback ratio
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Delay and early reflected delay balance (0% = all early
0–100%
reflected delay, 100% = all delay)
S-Hall, L-Hall, Random,
Type of early reflection simulation
Revers, Plate, Spring
0.1–20.0 Reflection spacing
0–10 Early reflections decay characteristics (0 = dead, 10 = live)
0.0–500.0 ms Initial delay before reverb begins
0–10 Spread
0–100% Reverb density
1–19 Number of early reflections
OFF, ON Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel
1
DELAY L
Used in conjunction with TEMPO to determine right channel
1
DELAY R
Used in conjunction with TEMPO to determine FB. DLY
1
Description
(Maximum value depends on the tempo