Yamaha DM1000 Owner's Manual page 161

Fading Output Channels
To set the Fade Time for the Output Channels (Stereo Out, Bus Outs 1–8, Aux Outs 1–8),
press the DISPLAY ACCESS [SCENE] button repeatedly until the Scene | Out Fade page
appears.
The basic operation is the same as on the In Fade page.
1
2
3
A
BUS1–8
These parameters enable you to set the Fade Time for each Bus Out (1–8) in the range
of 00.0 through 30.0 seconds.
B
AUX1–8
These parameters enable you to set the Fade Time for Aux Outs 1–8.
C
STEREO
This parameter enables you to set the Fade Time for the Stereo Out.
Tip: You can copy the currently-selected Output Channel Fade Time setting to all Output
Channels by double-clicking the [ENTER] button.
161
Fading Scenes
DM1000—Owner's Manual
14