Yamaha DM1000 Owner's Manual page 158

158
Chapter 14—Scene Memories
Storing and Recalling Scenes Using the Scene Memory Page
On the Scene Memory page, you can store, recall, write-protect, delete, and edit the titles of
Scenes.
1 Adjust the mix parameters on the DM1000 to the conditions you wish to
store as a Scene.
2 Press the DISPLAY ACCESS [SCENE] button repeatedly until the Scene | Scene
page appears.
3 Rotate the Parameter wheel or press the [INC]/[DEC] buttons to select a
Scene memory, move the cursor to one of the following buttons, then press
[ENTER].
The stored Scene memory titles are displayed. The DM1000 displays the message "No
Data!" for empty Scene memories.
A
TITLE EDIT
Select this button to display the Title Edit window, which enables you to edit a selected
Scene title.
B
RECALL
This button recalls the contents of the selected Scene memory.
C
STORE
This button stores the current Scene to the selected Scene memory. By default, a confir-
mation window appears before you store the Scene.
D
CLEAR
This button deletes the contents of the selected Scene memory.
E
PROTECT ON/OFF
This button switches on and off the write-protection of the contents of the selected
Scene memory. A padlock icon (
write-protected.
F
PATCH LINK INPUT
These parameters indicate the Input Patch library numbers selected at the time the
Scenes were stored. When you recall a Scene, the linked Input patch is recalled as well.
You can also move the cursor to the parameter boxes and change the library numbers.
DM1000—Owner's Manual
1
2
3
4
5
) appears next to the title of a Scene memory that is
6 7