Download Print this page

Yamaha 02R96-v2 Quick Start Manual

Commercial audio.
Hide thumbs

Advertisement

02R96-v2 Quick Start Guide
1 02R96-v2 Quick Start Guide

Advertisement

   Related Manuals for Yamaha 02R96-v2

   Summary of Contents for Yamaha 02R96-v2

  • Page 1

    02R96-v2 Quick Start Guide 1 02R96-v2 Quick Start Guide...

  • Page 2

    SCENE 00. To do this, use the SCENE MEMORY Up-Arrow/Down- Arrow switches to select Scene ‘00’ and then press RECALL. All the faders will then move down and all the mixing functions set to their default status. 2 02R96-v2 Quick Start Guide...

  • Page 3

    For example, the CONTROL port (25-pin D-sub) is for low voltage GPI relays. The CASCADE IN and OUT ports are for connecting with other 02R96 consoles to share audio buses. The METER connector is for the optional Meter Bridge. 3 02R96-v2 Quick Start Guide...

  • Page 4

    Only one channel can be selected at any time. To select a channel (and see its settings in the SELECTED CHANNEL area), just press the SEL switch. Then press the SEL switch for another channel when you are ready to move on. 4 02R96-v2 Quick Start Guide...

  • Page 5

    1-24 control the 24 analog inputs on the top on the console; channels 25-32 control inputs 1-8 from Slot 1; channels 33-40 control inputs 1-8 from Slot 2; channels 41-48 control inputs 1-8 from Slot 3; channels 49-56 control inputs from internal Effects 1-4. 5 02R96-v2 Quick Start Guide...

  • Page 6

    (Slot # or FX # for example). 7. Press ENTER and choose the required item from the last column (CH# or L/R for example). 8. Press ENTER and click YES on the screen to complete the Patch change. 6 02R96-v2 Quick Start Guide...

  • Page 7

    Send levels are shown on the faders instead of the channel level. Choose which Aux to see on the faders with the AUX SELECT switches (as in step 2 above). Press the FADER switch to resume normal level operation on the faders. 7 02R96-v2 Quick Start Guide...

  • Page 8

    High Shelf or a LPF. There are 2 types of EQ (TYPE I or TYPE II), with slightly different sound characteristics. The ATT function is an attenuator, or digital trim to adjust the channel level pre-eq. 8 02R96-v2 Quick Start Guide...

  • Page 9

    The Joystick is not active until a surround mode is selected. To do this, press the PAN/SURROUND DISPLAY switch so the SURR MODE page is shown. Then choose the SURROUND MODE: 3-1 or 5.1 or 6.1. This will then convert some of the buses (1-8) into Surround Buses. 9 02R96-v2 Quick Start Guide...

  • Page 10

    To do this, press the ROUTING DISPLAY switch to see the BUS TO ST screen. Here Buses 1-8 can be routed, panned and mixed to the Stereo Bus. Use the cursor keys, data wheel and ENTER switch to adjust the parameters. 10 02R96-v2 Quick Start Guide...

  • Page 11

    FB.GAIN (Feedback Gain) and MIX parameter to create a simple delay effect. The DELAY SCALE can be changed to see the delay time in equivalent distance, number of samples, beats-per-minute or number of Frames (linked to Time-Code Frame Rate). 11 02R96-v2 Quick Start Guide...

  • Page 12

    To quickly pair channels without using the LCD screen, first [1] hold down the SEL switch for the Left channel, then [2] also hold down the SEL switch for the Right channel (or vice versa) for half a second. This only works in Horizontal Pair Mode. 12 02R96-v2 Quick Start Guide...

  • Page 13: Mute Groups

    Inputs, Groups U to X are for Outputs). Once a Mute Group is made, when the ON switch for one channel is pressed, all the other channels in the same Group are also switched On/Off. 13 02R96-v2 Quick Start Guide...

  • Page 14

    To change the type of effect (from Reverb to Delay for example), press the EFFECTS/PLUG-INS DISPLAY switch to see the FX LIBRARY. Then scroll through the list with the data wheel, and press ENTER with the cursor over the RECALL button on the left of the screen. 14 02R96-v2 Quick Start Guide...

  • Page 15

    EFFECT1-4 page in the INPUT PATCH display menu. ROUTING AUDIO THROUGH AN EFFECT 1. First, audio needs to be routed into the effect. If the default patch is used, first turn up Aux 1 send level for the required channel. 15 02R96-v2 Quick Start Guide...

  • Page 16

    3. Already audio should be seen on the level meters of Effect 1. You can see the meters on the top-right corner of the FX EDIT screen. 4. Then push up faders 49 and 50 to start hearing the effect’s output in the Stereo bus. 16 02R96-v2 Quick Start Guide...

  • Page 17

    Global Recall Safe box is checked (at the top of the screen), the chosen parameters will be safe in all Scenes. Otherwise, these settings will only apply to the current Scene once it is stored. 17 02R96-v2 Quick Start Guide...

  • Page 18

    In the PASTE DST screen, choose which Scene Memories should be updated. The maximum number is 10 Scenes for each operation. To move a Scene to a different position in the Library, use the SORT screen in the SCENE MEMORY menu: 18 02R96-v2 Quick Start Guide...

  • Page 19

    The TALKBACK on/off switch is located directly below the CONTROL ROOM LEVEL pot. To route TALKBACK to different outputs, access the TALKBACK display in the MONITOR menu: 19 02R96-v2 Quick Start Guide...

  • Page 20

    This can be useful for creating a MIX-MINUS. First set an AUX to ALL NOMINAL, using the switch at the top of the SEND1-24 page in the AUX DISPLAY menu, then hold the AUX SELECT switch to switch off the send for the required ‘minus’ channel. 20 02R96-v2 Quick Start Guide...

  • Page 21

    BANK F. The USER DEFINED KEY will then light up to confirm the assignment. NOTE ___________________________________________________ A Channel cannot be in more than one FADER GROUP at a time, and cannot be in more than one MUTE GROUP at a time. 21 02R96-v2 Quick Start Guide...

  • Page 22

    LEVEL pot as the listening level. Make sure STEREO is not selected as the CONTROL ROOM SOURCE at this time (or switch the Stereo Master channel off). When returning to Stereo mixing, remember to turn the CONTROL ROOM LEVEL down again. 22 02R96-v2 Quick Start Guide...

  • Page 23

    Then switch it on again while holding the SCENE STORE switch. Choose INITIALIZE to erase all the libraries and return to the default settings. Check for the latest downloads at www.yamahaproaudio.com 23 02R96-v2 Quick Start Guide...

This manual also for:

Dm1000-v2

Comments to this Manuals

Symbols: 0
Latest comments: