Compressing Input Channels - Yamaha DM1000 Owner's Manual

B
STEREO LINK
This parameter's ON/OFF button enables you to pair gates for stereo operation even
when the Input Channels are not paired.
C
CURVE
This area displays the current gate curve.
D
TYPE
This area displays the current gate type (GATE or DUCKING).
Note: You cannot change the gate type on this page. To change the gate type, recall a program
that uses the desired gate type from the Gate library.
E
Meters
These meters indicate the levels of the post-gate signals and the amount of gain reduc-
tion.
F
ON/OFF
The ON/OFF button turns the currently-selected Input Channel's gate on or off.
G
PARAMETER
These controls enable you to set the gate parameters. (See page 320 for more informa-
tion on the parameters.)
Tip: You can store the gate settings in the Gate library, which features preset programs that
can be used for various applications (see page 174).

Compressing Input Channels

To set the Input Channel compressors, use the [SEL] buttons to select the desired Input
Channel, then press the DISPLAY ACCESS [DYNAMICS] button, then the [F3] button to
display the Dynamics | Comp Edit page.
1
6
A
POSITION
Use the Parameter wheel, or the [INC]/[DEC] buttons to select the position of the com-
pressor within the channel from the following options:
• PRE EQ ..........................Immediately before EQ (default)
• PRE FADER ..................Immediately before the fader
• POST FADER ...............Immediately after the fader
B
STEREO LINK
This ON/OFF button enables you to pair compressors for stereo operation even when
channels are not paired.
Setting the Input Channels from the Display
2 3
63
4
5
7
DM1000—Owner's Manual
6