Bus to Stereo Library
You can store Bus to Stereo settings (levels and panpots of signals routed from Bus Outs 1–8
to the Stereo Bus). The library contains one preset memory and 32 user (readable & writ-
able) memories.
To access the Bus to Stereo library, press the SELECTED CHANNEL [DISPLAY] button
repeatedly until the Routing | Library page appears.
A
CURRENT CONFIGURATION section
Bus Out (1–8) pairing information for the current configuration is displayed here.
Note: You can recall only Bus to Stereo library memories that have the same Bus Out (1–8)
pairing configuration as the current configuration.
B
LIBRARY CONFIGURATION box
Bus Out pairing information for the configuration stored in the currently-selected
memory is displayed here. When the current configuration and the configuration in the
selected memory do not match, the word "CONFLICT" appears in the LIBRARY CON-
FIGURATION box, although you can still recall the memory.
For details on storing and recalling memories, see "General Library Operation" on
page 165.
173
Using Libraries
1
2
DM1000—Owner's Manual
15