Yamaha DM1000 Owner's Manual page 230

230
Chapter 17—Remote Control
9 Move the cursor to the LATCH/UNLATCH button, then press [ENTER] to
select LATCH or UNLATCH depending on how you want the [ON] buttons
to function.
• LATCH .......................... Pressing the [ON] buttons repeatedly transmits alternating On
• UNLATCH.................... Pressing and holding down the [ON] buttons transmits On
Tip: Refer to the diagrams below for information on how the [ON] buttons behave when Latch
or Unlatch is selected.
■ When "SW" is assigned:
- LATCH
- UNLATCH
■ When "SW" is not assigned:
- UNLATCH
Tip: In most situations, select Unlatch if SW is not assigned.
10 To change the channel name, move the cursor to the ID LONG parameter
box, then press [ENTER] to display the Title Edit window.
See page 30 for more information on editing names.
Tip:
• Move the cursor to the INITIALIZE button, then press [ENTER]. A window is displayed
that enables you to reset the parameter settings in the currently-selected bank.
• You can also assign MIDI messages to the parameter boxes manually without using the
LEARN button.
DM1000—Owner's Manual
and Off messages.
messages, and releasing the [ON] buttons transmits Off mes-
sages.
MIDI data transmission
(SW=7F)
Off Illuminated
MIDI data transmission
(SW=7F)
Off Illuminated
MIDI data transmission
Off Illuminated
MIDI data transmission
(SW=00)
Off
MIDI data transmission
(SW=00)
Off
Off