Yamaha DM1000 Owner's Manual page 302

302
Appendix A: Parameter Lists
REV+CHORUS
One input, two output reverb and chorus effects in parallel.
Parameter
REV TIME
INI. DLY
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV/CHO
FREQ.
AM DEPTH
PM DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
REV->CHORUS
One input, two output reverb and chorus effects in series.
Parameter
REV TIME
INI. DLY
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV.BAL
FREQ.
AM DEPTH
PM DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
DM1000—Owner's Manual
Range
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Reverb and chorus balance (0% = all reverb, 100% = all cho-
0–100%
rus)
0.05–40.00 Hz Modulation speed
0–100% Amplitude modulation depth
0–100% Pitch modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF, ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Range
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Reverb and chorused reverb balance (0% = all chorused
0–100%
reverb, 100% = all reverb)
0.05–40.00 Hz Modulation speed
0–100% Amplitude modulation depth
0–100% Pitch modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF, ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Description
Description