Yamaha DM1000 Owner's Manual page 233

7 To start remote control, press the DISPLAY ACCESS [REMOTE] button, then
press the [F3] button to display the Remote | Machine page.
2
3
4
This page contains the following parameters:
A
LOCATE/TIME section
This section enables you to set the locate points.
• LOCATE 1–8 .................These buttons locate the positions (specified by the TIME val-
• RTZ ................................This Return To Zero button locates the zero timecode position
• TIME..............................Locate points are specified in hour/minute/second/frame for-
• CAPTURE .....................These buttons capture the current position on external
B
TRACK ARMING section
This section controls the tracks on external machines.
• 1–24 buttons.................These buttons turn external tracks 1–24 on or off, and set or
• ALL CLEAR...................Turning on this button switches all buttons (1–24) simulta-
C
TRANSPORT section
This section enables you to control the transport functions on external machines.
• REW...............................This button starts rewind on external machines.
• FF....................................This button starts fast forward on external machines.
• STOP..............................This button stops external machines.
• PLAY ..............................This button starts playback on external machines.
• REC ................................This button is used in conjunction with the PLAY button to
D
FRAMES
This parameter selects the timecode frame rate.
8 To control the transport functions, move the cursor to the desired button in
the TRANSPORT section, then press [ENTER].
9 If you desire, move the cursor to the buttons and parameters in the
LOCATE/TIME section and the TRACK ARMING section, then press the
[ENTER] button or rotate the Parameter wheel to control the transport func-
tions on external machines.
Machine Control Function
ues) on external machines.
on external machines.
mat.
machines and import the information into the TIME column.
cancel their Record Ready mode.
neously.
start recording on external machines.
233
1
DM1000—Owner's Manual
17