Yamaha DM1000 Owner's Manual page 271

Digital production console
Hide thumbs Also See for DM1000:
Table of Contents

Advertisement

3 Press the DISPLAY ACCESS [SETUP] button repeatedly until the Setup |
Remote page appears.
1
3
This page contains the following parameters:
A
REMOTE FUNCTION
This parameter selects a device to be connected to the DM1000 REMOTE connector.
B
AD824 section
This section enables you to specify the slot channels that will receive eight channel sig-
nals from AD824s that have their ID numbers set to 1 through 4.
C
AD824 GAIN/PHANTOM CONTROL section
This section enables you to set the AD824 channel 1–8 gain and the Phantom power on
or off.
• ID #1–#4........................These buttons select the AD824s you want to control.
• 1–8..................................These parameter controls adjust the gain for AD824 channels
• +48V ..............................When you turn on these buttons, the phantom power on the
4 Make sure that the REMOTE FUNCTION parameter is set to "AD824," and
in the AD824 section select the slot channels that receive signals from the
AD824s.
5 Use the parameter controls and buttons in the AD824 GAIN/PHANTOM
CONTROL section to set the channel gain and switch the channel phantom
power on or off.
1–8.
corresponding channels are turned on.
271
Using the AD824
2
DM1000—Owner's Manual
19

Advertisement

Table of Contents
loading

Table of Contents