Selecting Fader Modes - Yamaha MIXING CONSOLE Owner's Manual

Selecting Fader Modes

The function of channel faders (1–16) depends on the selected Layer and Fader mode.
1 Select a layer that includes the desired channel (see page 31).
2 Press the FADER MODE buttons to select a Fader
mode.
The button indicators identify the following Fader modes:
• When the [HOME] button indicator lights up:
You can use channel faders to control Input Channels
and ST IN Channel levels or Output Channels (Aux
Out 1–8, Bus Out 1–8) master levels.
• When one of the [AUX1]–[AUX8] button indicators
light up:
You can use channel faders to control the correspond-
ing Aux Send level.
The following table shows the channel fader functions for each Layer and Fader mode.
LAYER buttons
[1–16] button
[17–32] button
[REMOTE] button
[MASTER] button
Note: You cannot select the [AUX1]–[AUX8] buttons while the Master layer or Remote layer
is selected. If you switch to the Master layer while one of the [AUX1]–[AUX8] button indicators
is lit, the indicator automatically turns off and the [HOME] button indicator lights up.
Fader Mode
[HOME] button
Input Channel 1–16 level
[AUX1]–[AUX8] buttons
Input Channel 1–16 Aux Send level
[HOME] button
Input Channel 17–32 level
[AUX1]–[AUX8] buttons
Input Channel 17–32 Aux Send level
Operation depends on the selected target (see
[HOME] button
page 185).
[AUX1]–[AUX8] buttons
No operation
Aux Send master 1–8
[HOME] button
output level
[AUX1]–[AUX8] buttons
No operation
Selecting Fader Modes
FADER MODE
1 2 3
AUX AUX AUX
5 6 7
AUX AUX AUX
HOME (METER)
Channel Strip Fader
1–8 9–16
Bus Out master1–8
output level
01V96—Owner's Manual
33
3
4
AUX
8
AUX