Yamaha DM1000 Owner's Manual page 268

268
Chapter 19—Other Functions
7 On the master unit, press the DISPLAY ACCESS [DIO] button repeatedly until
the DIO | Cascade page appears, then adjust the Attenuators using the
parameter controls.
The DIO | Cascade page enables you to adjust the level of signals input to the Cascade Bus
using the dedicated attenuators. You can also turn the Cascade Buses on or off using the but-
tons below the parameter controls.
8 On the slave unit, press the DISPLAY ACCESS [SETUP] button repeatedly to
display the Setup | Remote page, then set the REMOTE FUNCTION param-
eter (
9 Press the DISPLAY ACCESS [SETUP] button repeatedly to display the Setup
| MIDI/Host page, then set the Cascade Link parameter to "REMOTE."
After Steps 8 and 9, the slave unit will be able to transmit and receive MIDI messages via the
REMOTE connector.
DM1000—Owner's Manual
1
) to "MIDI."
1