Libraries; Analog Input Spec; Analog Output Spec - Yamaha DM1000 Owner's Manual

330
Appendix B: Specifications

Libraries

Effect library (EFFECT 1–4)
Compressor library
Gate library
EQ library
Channel library
Surround Monitor library
Input patch library
Output patch library
Bus to Stereo library

Analog Input Spec

Input PAD GAIN
–60 dB
0
INPUT 1–16
–16 dB
20
OMNI IN 1–4
—
1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when the unit
is set to maximum gain. (All faders and level controls are maximum position.)
2. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
All input AD converters (INPUT 1–16, OMNI INPUT 1–4, TALKBACK) are 24-bit linear, 128-times oversampling. (@fs=44.1,
48 kHz)
+48 V DC (phantom power) is supplied to CH INPUT (1–16) XLR type connectors via individual switches.

Analog Output Spec

Output
OMNI OUT 1–12
PHONES
1. XLR-3-32 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
2. PHONES stereo phone jack is unbalanced (Tip=LEFT, Ring=RIGHT, Sleeve=GND).
In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
All output DA converters (OMINI OUT 1–12, PHONES) are 24-bit, 128-times oversampling. (@fs=44.1, 48 kHz)
DM1000—Owner's Manual
Presets
User memories
Presets
User memories
Presets
User memories
Presets
User memories
Presets
User memories
Presets
User memories
Presets
User memories
Presets
User memories
Presets
User memories
Actual Load For Use With
Impedance Nominal
50–600
3k Mics & 600
Lines
10k 600 Lines
Actual
For Use With
Source
Nominal
Impedance
150 600 Lines
8 Phones
100
40 Phones
52 (EFFECT 2–4: 44)
76
36
92
4
124
40
160
2
127
1
32
1
32
1
32
1
32
Input level
1
Nominal
Sensitivity
before clip
–70 dB –60 dB
(0.245 mV) (0.775 mV) (7.75 mV)
–26 dB –16 dB
(38.8 mV) (0.123 V)
–6 dB +4 dB
(388 mV) (1.23 V)
+4 dB +4 dB
(1.23 V) (1.23 V)
Output level
Max.
Nominal
before clip
+4 dB +24 dB
XLR-3-32 type (Balanced)
(1.23 V) (12.28 V)
4 mW 25 mW Stereo Phone Jack (TRS)
12 mW 75 mW (Unbalanced)
Connector
Max.
–40 dB
+4 dB
(1.23 V) XLR-3-31 type
2
+24 dB (Balanced)
(12.28 V)
+24 dB
(12.28 V)
Connector
1
2