Yamaha DM1000 Owner's Manual page 106

106
Chapter 9—Input & Output Patching
Input Patching from the Display
1 Press the DISPLAY ACCESS [INPUT PATCH] button repeatedly until the In
Patch | In Patch page appears.
Inputs and slot channels that are currently assigned to Input Channels are shown in the
parameter boxes (
below:
Parameter values
–
AD1–AD16
OMN1–OMN4
S1-1–S116
S2-1–S216
FX1-1–FX1-8
FX2-1–FX2-2
FX3-1–FX3-2
FX4-1–FX4-2
2D1L & 2D1R
2D2L & 2D2R
BUS1–8
AUX1–8
2 Move the cursor to an input patch parameter you wish to change, and rotate
the Parameter wheel or press the [INC]/[DEC] buttons to modify the patch-
ing.
The long name of the currently-selected channel is
indicated in the upper-right corner of the screen (
Below the channel name is the long name of the
selected input/slot channel (
more information on changing channel names.)
3 Press [ENTER] to confirm the change.
Tip:
• You can patch an input signal to multiple Input Channels.
• You can store the Input Patch settings to the Input Patch library. Refer to Chapter 15 "Librar-
ies" on page 165 for more information.
• The number of outputs of internal Effects processor 1 varies depending on the selected effect
program. (See page 147 for more information on effect programs.)
DM1000—Owner's Manual
1
1
) below the channel numbers. The parameter indicators are explained
Description
No assignment
INPUT connectors 1–16
OMNI IN connectors 1–4
Channels 1–16 of Slot 1
Channels 1–16 of Slot 2
Outputs 1–8 of Internal Effects Processor 1
Outputs 1 & 2 of Internal Effects Processor 2
Outputs 1 & 2 of Internal Effects Processor 3
Outputs 1 & 2 of Internal Effects Processor 4
2TR DIGITAL IN 1 (L/R)
2TR DIGITAL IN 2 (L/R)
Bus 1–8 Outputs
Aux 1–8 Outputs
2
). (See page 249 for
1
).
1
2