Yamaha DM1000 Owner's Manual page 294

294
Appendix A: Parameter Lists
ECHO
Two input, two output stereo delay with crossed feedback loop.
Parameter
DELAY L
DELAY R
FB.DLY L
FB.DLY R
FB. G L
FB. G R
L->R FBG
R->L FBG
HI. RATIO
HPF
LPF
SYNC
NOTE L
NOTE R
NOTE FBL
NOTE FBR
1.
setting)
CHORUS
Two input, two output chorus effect.
Parameter
FREQ.
AM DEPTH
PM DEPTH
MOD. DLY
WAVE
LSH F
LSH G
EQ F
EQ G
EQ Q
HSH F
HSH G
SYNC
NOTE
1.
DM1000—Owner's Manual
Range
0.0–1350.0 ms Left channel delay time
0.0–1350.0 ms Right channel delay time
0.0–1350.0 ms Left channel feedback delay time
0.0–1350.0 ms Right channel feedback delay time
Left channel feedback gain (plus values for normal-phase
–99 to +99%
feedback, minus values for reverse-phase feedback)
Right channel feedback gain (plus values for normal-phase
–99 to +99%
feedback, minus values for reverse-phase feedback)
Left to right channel feedback gain (plus values for nor-
–99 to +99% mal-phase feedback, minus values for reverse-phase feed-
back)
Right to left channel feedback gain (plus values for nor-
–99 to +99% mal-phase feedback, minus values for reverse-phase feed-
back)
0.1–1.0 High-frequency feedback ratio
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
OFF, ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine DELAY L
1 Used in conjunction with TEMPO to determine DELAY R
Used in conjunction with TEMPO to determine FB.DLY L
1
Used in conjunction with TEMPO to determine FB.DLY R
1
Range
0.05–40.00 Hz Modulation speed
0–100% Amplitude modulation depth
0–100% Pitch modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
21.2 Hz–8.00 kHz Low shelving filter frequency
–12.0 to +12.0 dB Low shelving filter gain
100 Hz–8.00 kHz EQ (peaking type) frequency
–12.0 to +12.0 dB EQ (peaking type) gain
10.0–0.10 EQ (peaking type) bandwidth
50.0 Hz–16.0 kHz High shelving filter frequency
–12.0 to +12.0 dB High shelving filter gain
OFF, ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Description
(Maximum value depends on the tempo
Description