Yamaha DM1000 Owner's Manual page 202

202
Chapter 16—Automix
6 To execute the selected Job, move the cursor to the EXECUTE button, then
press [ENTER].
A confirmation window appears. Move the cursor to the YES button, then press [ENTER]
to execute the Job.
Tip:
• Move the cursor to the NO button, then press [ENTER] to abort the Job.
• To return to the previous page without executing the Job, move the cursor to the
button, then press [ENTER].
Event Edit Page
The Event Edit page enables you to edit, duplicate, delete events and insert new events.
1 Press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the Automix
| Event Edit page appears.
A
Event list
This list contains the Automix event time, channels, and parameter values. The cur-
rently-selected event in the list is indicated by a triangular icon (®). Use the Up and
Down cursor buttons to select an event, and use the Left and Right cursor buttons to
select a parameter value of the selected event.
B
SYNC
This button synchronizes the event list to the current timecode position. Move the cur-
sor to this button, then press [ENTER] to select events closest to the current timecode
position.
C
DUPLICATE
This button duplicates the event selected in the list.
D
DELETE
This button deletes the event selected in the list.
E
SELECTED CH
When this option is on, only events of the channels currently selected by the channel
[SEL] buttons are displayed in the list.
F
Event select buttons
These buttons select the type of events to be displayed in the event list.
DM1000—Owner's Manual
1 5 3
7 K
2
4
6
8
9
J