Yamaha DM1000 Owner's Manual page 211

E
INSERT ASSIGN/EDIT section
This section enables you to insert plug-ins into Pro Tools channels and adjust plug-in
settings. Use the left and right [
displayed in this section.
• ASSIGN .........................Turn on this button to insert plug-ins into Pro Tools channels.
• COMPARE ....................You can compare your edits with the original settings by turn-
• BYPASS..........................Turning on this button bypasses the plug-ins (see page 221).
• INSERT/PARAM..........Switching this button to INSERT enables you to assign plug-ins
• Information box ..........This box displays plug-in parameter names, values, alarm mes-
• Rotary controls 1–4.....These controls enable you to select plug-ins or adjust the
■ Channel Display mode ( [F3] button)
Press the [F3] button to select this display mode, in which the parameter controls for tracks
1–16 are displayed.
• Parameter controls 1–16 ................... Channel parameter controls, such as channel
Pro Tools Remote Layer
]/[ ] Tab Scroll buttons to change the parameters
(If you are using the TDM system, you can also assign outboard
effects processors.)
ing on this button. This button works in unison with the Com-
pare button in the Pro Tools Inserts and Sends windows.
using four rotary controls on the page. Switching this button to
PARAM enables you to adjust the plug-in parameters using the
four rotary controls (see page 220).
sages from Pro Tools, etc.
selected plug-in parameters.
1–16 panpots, Send A–E send levels, etc. are dis-
played.
211
DM1000—Owner's Manual
17