Yamaha DM1000 Owner's Manual page 203

G
INSERT
This button inserts a new event in the position selected in the event list.
H
LOCATE
This button locates events at (or closest to) the timecode position indicated on the Cap-
ture memory display.
I
Capture memory display
This display counter indicates the captured timecode position.
J
CAPTURE
This button captures the current timecode position. Up to eight timecode values can be
captured and stored in the eight Capture memories.
K
Capture memory
This box indicates the number of the currently-selected Capture memory (1–8).
2 Use the Event select buttons to select the type of events to be displayed in
the event list.
The format of the list varies depending on the selected event. The following table shows the
events that correspond to the Event select buttons, and the list format:
Button
SCENE/LIB
Library and Scene recall events
Channel Fader events (Inputs Channels, Bus
FADER
Out masters, Aux Out masters, and the Stereo
Out)
ON
Channel Mutes (ON/OFF)
PAN
Pan
SURR-PAN
Surround Pan
SURR-LFE
Surround LFE
SURR-DIV
Surround DIV
SURR-RDIV
Surround RDIV
EQ-ON
EQ On/Off
EQ-FREQ
EQ Frequency
EQ-Q
EQ Q
EQ-GAIN
EQ Gain
AUX
Aux Send 1–8 levels
AUX ON
Aux Send 1–8 mutes
Tip: When the SELECTED CH check box is on, only events of the currently-selected channel
are displayed.
Note: If the data size of the selected event exceeds 2 MB, the message "Automix Work Memory
Full!" appears, and not all events may be displayed. In this case, check the SELECTED CH
check box to display only events of the selected channel.
3 To duplicate or delete events, select an event by moving the triangular icon
(® ® ® ® ) to the event in the list, then select the DUPLICATE or DELETE button.
4 To modify the event time, channel or parameter value, move the cursor to
a parameter value you wish to change, then rotate the Parameter wheel or
press the [INC]/[DEC] buttons.
Events Listed
Editing Events Offline
List Format
TIME CODE, CH, SCENE/LIB
TIME CODE, CH, dB, SEC
TIME CODE, CH, ON/OFF
TIME CODE, CH, L-C-R
TIME CODE, CH, SURR
TIME CODE, CH, dB
TIME CODE, CH, DIV
TIME CODE, CH, RDIV
TIME CODE, CH, ON/OFF
TIME CODE, CH, BAND/Hz
TIME CODE, CH, BAND/Q
TIME CODE, CH, BAND/dB
TIME CODE, CH, AUX, dB
TIME CODE, CH, AUX, ON/OFF
DM1000—Owner's Manual
203
16