Gate Library - Yamaha DM1000 Owner's Manual

174
Chapter 15—Libraries

Gate Library

The Gate library enables you to store and recall Input Channel gate settings. The library
contains four preset memories and 124 user (readable & writable) memories.
Follow the steps below to use the Gate library.
1 Press the DISPLAY ACCESS [DYNAMICS] button, then press the [F2] button.
The Dynamics | Gate Lib page appears.
A
CURRENT TYPE
This parameter displays the currently-selected channel gate type (Gate or Ducking).
B
CURRENT CURVE
This graph displays the current channel gate curve.
C
GR meters
These meters indicate the amount of gain reduction being applied by the gate, and the
post-gate levels of the currently-selected channel and its available pair partner.
D
Type & Curve section
The type (Gate or Ducking) and curve of the currently-selected memory is displayed
here.
Tip: If you selected an Aux Out (1–8), Bus Out (1–8), or Stereo Out that does not feature a
gate, the DM1000 indicates "XXX HAS NO GATE!" (in which XXX represents a signal name).
2 Use the LAYER buttons to select layers, then press the [SEL] buttons to select
channels.
You can now store the selected channel gate settings or recall the gate library memories to
channels. For details on storing and recalling memories, see "General Library Operation"
on page 165.
The following table lists the preset memories in the Gate library:
No.
1
2
3
4
DM1000—Owner's Manual
1
2
Preset Name Type
Gate
GATE
Ducking
DUCKING
A. Dr. BD
GATE
A. Dr. SN
GATE
Description
Gate template
Ducking template
Gate preset for use with acoustic bass drums
Gate preset for use with acoustic snare drums
3
4